MPME Abrasives

Consistent quality & supply

Certified abrasives,
every batch.

Off-spec abrasive and unreliable delivery ripple straight into your output — as rejects, faster wear and unplanned stoppages. We engineer that risk out, batch by batch.

When abrasive quality and supply aren't reliable

The real cost isn't the abrasive — it's the rework and downtime around it, often larger than the abrasive spend itself.

  • Grade variation → uneven finish, higher reject rates
  • Impurities & fines → faster wear of impellers, liners and spares
  • Stockouts → unplanned stoppages and expedited freight
Steel grit grades G14 to G50 and steel shot grades S110 to S780, photographed side by side for size comparison

How MPME prevents it

  1. 01Certified manufacturing — ISO 9001:2015 and ZED-certified processes
  2. 02Every batch tested — a 5-step internal QA before dispatch
  3. 03Independent verification — twice-monthly checks at NABL-accredited labs
  4. 04Capacity to buffer — 2,000 MT/month keeps safety stock available
  5. 05Joint planning — min/max levels agreed with your stores team

Every batch tested

Five internal checks on every batch, plus independent lab testing twice a month — so what reaches your floor is what you specified.

  • Metal-bath testing in wet lab
  • Optical Emission Spectrometer analysis
  • Visual defect analysis
  • Sieve-ratio analysis
  • Hardness & microstructure analysis

Independent verification

  • Third-party testing twice monthly at NABL-accredited labs
  • ISO 9001:2015 quality management
  • ZED (Zero Defect Zero Effect) certified
  • Conformance to ISO 11124-3, SAE J827/J444 and IS 4606

Made to specification

Steel Shots

  • Density > 7.3 g/cc
  • Hardness 40–51 HRC
  • Uniform / tempered martensite

Steel Grit

  • Density > 7.4 g/cc
  • GP 40–51 · GB 47–56 HRC
  • GL 54–61 · GH > 60 HRC

Cut Wire

  • 4 grades (as-cut to spherical)
  • Ideal for shot peening
  • Workpiece HRC 40–50

Conformance to

  • ISO 11124-3
  • SAE J827/J444
  • IS 4606:1983

Size distribution

Size distribution table for steel shot, grades S-780 to S-110 (SS-2000 to SS-300): the percentage passing each IS sieve, per IS 4606:1983 and SAE J827/J444
Steel shot · IS 4606:1983 & SAE J827/J444View larger →
Size distribution table for steel grit, grades G-10 to G-120 (GS 200 to GS 09): the percentage passing each IS sieve, per IS 4606:1983 and SAE J827/J444
Steel grit · IS 4606:1983 & SAE J827/J444View larger →

Capacity & planning

Steel scrap to finished abrasive under one roof — with the volume to hold buffer stock and a plan built around your consumption.

2,000MT / month
105,000sq. ft. facility

See how certified materials cut consumption at real foundries, bright-bar units and wagon builders.

View the proof →