Foundry
Cleaner castings, lower consumption
From grey iron to steel and aluminium castings, blasting is what turns a raw casting into a machinable, paintable part.
Why blasting matters here
Castings arrive covered in burnt-on sand, mould residue and scale. Consistent blasting decides finish quality, machining yield and how much abrasive each tonne of castings consumes.
Common problems
- Sand contamination degrades the abrasive mix fast
- Grade variation → uneven cleaning and higher reject rates
- High, unpredictable consumption per tonne
- Impeller and liner wear from a contaminated mix
How MPME helps
01
Certified steel shot & grit (S-390 to S-660 for large-medium castings) that holds spec batch to batch
02
MFRS-P recovers abrasive lost to sand and spillage
03
A 5M assessment targets consumption directly — real foundry engagements have cut it from 7.4 to 6.6 and 4.6 to 4.1 kg/tonne
04
SB360 tracks consumption and mix quality live
Want the numbers for your plant? A free 360 assessment sizes the opportunity.
Book yours →